Razer Kraken Pro Cable Replacement

Replacing or repairing the Razer Kraken Pro cord can be a tricky job as the cable wires go through the plastic frame, and only the internal wires manage to pass through and not the outer insulation part. These individual wires then connect to a small circular board, and from there, they connect to the microphone and the drivers. The wires for the right-hand driver goes through the frame again from the opposite hole and through the headband.

To gain access to the wiring, there are four screws hidden behind a paper seal. Once you break the seal, your warranty will become invalid. A Philips screwdriver is required to undo the screws, and then the back cover comes off.

This Article Continues...