TDA2030A Audio Amplifier Kit Results

Here is the completed TDA2030 audio amplifier ready for testing. Once you have soldered all the components in place, use a flux cleaner to remove any oxide residue, and you will have a clean board with shiny soldering, ready for testing. Flux cleaners usually come in a spray can and are well worth it, as it cleans the board and the soldering, making the job professional. Before you apply power, double check to make sure there are no mistakes, and make sure the diodes and electrolytic capacitors are right way around. Also make sure the resistors are in their correct places.

View

Back View

This Article Continues...